Foto Transfer Potch Foto Transfer Potch (GZ170) is the easy way to transfer your images (photos, artwork, and even text!) on to a range of surfaces! This water-based medium works on canvas, wood, glass, porcelain, fabric (hand wash) and candles. Step-by-Step: Foto Transfer Potch Step One Reverse image and print on a laser printer. Cut out your image. Step Two Mark out on your surface where you will be placing the image. Step Three Apply a thick layer of Foto Potch using a brush. Step Four Place the image face down on to the Foto Potch. Step Five Squeegee out excess Foto Potch and wipe away with a damp cloth. Leave to dry for 24 hours. NB: A hair dryer can be used but please ensure it is completely dry; this is not suitable for candles. Step Six Use a spray bottle of water to wet down your image. Soak the paper thoroughly and repeatedly. Step Seven Gently rub away the paper fibres being careful not to pull off the image as well. Step Eight When dry your image will have a thin coating of paper fibres. Repeat Step six and seven if necessary. Step Nine Once dry, any remaining paper fibres can be hidden by applying a layer of Foto Transfer Potch Varnish.